From spending money on products to buying services, we have come a long way. People these days are moving towards spending their money on experiences. They are traveling more than ever, going camping, trekking, and other adventures in life.
With that in mind, camping has become one of the most sought-after experiences. It is a cost-effective activity that provides an opportunity for people from all social strata to cherish new experiences. All you need is a sturdy tent and supplies for your stay, and that’s it. While you can accommodate the supplies as per your budget, taking care of the tent will add to the overall life of the tent. In this article we have discussed 6 amazing tips that will help you take care of the tent, to use it for a longer period of time. Let’s take a look.
 |
| Aluminum Tent Solutions |
1. Don’t store a tent if it’s wet
Storing a tent if it is damp or wet can be damaging for the
tent. Not only the dampness will cause its paint to come off, but the fabric
can also be affected. There can be moisture in the poles of the tent that can
lead to the formation of rust, deteriorating the overall strength of the
structure. Once you are back from camping, make sure to clean it, and allow it
to dry. This will also take care of the possibility of fungus or mold
development in Aluminum Tent
Solutions Canada. Also, make sure that you store the tent away from direct
sunlight.
2. Handle Poles with Care
Poles are mostly damaged during the setting up of the tent
therefore take extra care of poles when you are setting the tent up. Prevent
them from colliding with each other, or even coming in contact with each other
because that can cause a dent in them or create cracks at their ends. Also, do
not apply too much pressure on poles when you are installing the tent because
it will straighten out the required curve in them. Straightened poles or rods
cannot form a good tent. Moreover, you might want to make sure that the poles
are fixed properly i-e they are inserted properly into one another before
bending them.
When you disassemble the tent, begin from the center and
move outwards so that the tension on the shock cord is distributed evenly.
3. Always use a Footprint
Footprints help keep the tent floor dry, clean and protected
from excessive wear and tear. Moreover, it acts as a barrier between the tent
floor and the ground. Hence, dirt, water, and mud can be kept away from the
floor. So, after camping, when you want to pack up the tent, you can do it
without having to clean it because the footprint kept it clean.
4. Do the Zippers Gently
Zippers make your life easy. We recommend you reciprocate
this gesture so that your tent can enjoy a long and healthy life, without
having to go for maintenance and repair every now and then. Use them gently,
and make sure to operate them slowly using both your hands. The nature of tent
fabric makes it taut when installed. You might feel a little bit of tension in
the zipper, so use both hands for undoing the zip. Also, be more vigilant when
working around the curve.
You can make zippers last longer by keeping them clean and
free of dirt.
5. Seal on the Seams
The seam tapes or sealants can be affected due to moisture,
heat, and humidity over a period of time. If you notice any leakage along the
seams, address this issue first and seal them to make them waterproof.
6. Avoid prolonged exposure to Direct Sunlight
You must be thinking that the purpose of a tent is to remain
in the open, to provide a shade from the sun and storms, right? Well, to that
extent it is not damaging. We are talking about putting the tent in the
backyard, and forgetting it completely. Of course, if it remains there for
months and months, the UV rays will damage nylon fiber, making it brittle and
affecting its tensile strength. This can lead to the ripping of fabric near
seams and joints.
